ADLINK Technology nanoX-AL, User Manual

Page: 37 / 97

nanoX-AL
Module Interfaces
29
4.4. MIPI60 Debug Header (build option)
Not all pins of the Intel
®
MIPI60 connector are connected to the CombiProbe Intel x86/x64 MIPI60-C.
Pin Signal Pin XDP Signal
1 VREF_DEBUG 2 TMS
3 TCK0 4 TDO
5 TDI 6 Open Drain Reset Out
7 Reset In 8 No Connect
9 TRST_N 10 PREQ_N
11 PRDY_N 12 VREF_TRACE
13 PTI_0_CLK 14 PTI_1_CLK
15 GND 16 GND
17 No Connect 18 PTI_1_DATA[0]
19 PTI_0_DATA[0] 20 PTI_1_DATA[1]
21 PTI_0_DATA[1] 22 PTI_1_DATA[2]
23 PTI_0_DATA[2] 24 PTI_1_DATA[3]
25 PTI_0_DATA[3] 26 No Connect
27 PTI_0_DATA[4] 28 No Connect
29 PTI_0_DATA[5] 30 No Connect
31 PTI_0_DATA[6] 32 No Connect
33 PTI_0_DATA[7] 34 Reset Out
35 No Connect 36 Boot Stall
37 No Connect 38 CPU Boot Stall
39 No Connect 40 Power Button
41 No Connect 42 PWRGOOD
43 No Connect 44 No Connect
45 No Connect 46 No Connect
47 No Connect 48 I2C_SCL
49 No Connect 50 I2C_SDA
51 No Connect 52 No Connect
53 No Connect 54 DBG_UART_TX
55 No Connect 56 DBG_UART_RX
57 GND 58 GND
59 No Connect 60 No Connect
Table 4: MIPI60 Debug Header Pin Definition