manualshive.com logo in svg

ADLINK Technology MXC-6300, User Manual, Page: 71 / 128

Share
Download
ADLINK Technology MXC-6300 User Manual Download Page 71

Driver Installation

 59

MXC-6300

3.3

Installing the Ethernet driver

1. Close any running applications.

2. Insert the ADLINK All-in-One DVD. The drivers are

located in:
x:\Driver Installation\Matrix\MXC-6300\Win7_32bit\LAN-
Intel\
x:\Driver Installation\Matrix\MXC-6300\Win7_64bit\LAN-
Intel\
where x: denotes the DVD-ROM drive.

3. Execute setup.exe and follow onscreen instructions to

complete the setup.

4. After installation is complete, reboot the system.

3.4

Installing the audio driver

The MXC-6300 supports Intel High Definition audio using the
Realtek ALC269 audio codec.

1. Close any running applications.

2. Insert the ADLINK All-in-One DVD. The drivers are

located in:
x:\Driver Installation\Matrix\MXC-6300\Win7_32bit\
Audio\
x:\Driver Installation\Matrix\MXC-6300\Win7_64bit\
Audio\
where x: denotes the DVD-ROM drive.

3. Execute Setup.exe and follow onscreen instructions to

complete the setup.

4. After installation is complete, reboot the system.

3.5

Installing the USB 3.0 driver

The MXC-6300 supports USB 3.0 using Intel QM77 chipset.

1. Close any running applications.

2. Insert the ADLINK All-in-One DVD. The drivers are

located in:
x:\Driver Installation\Matrix\MXC-6300\Win7_32bit\

PRELIMINARY

Summary of Contents for MXC-6300

































































































































Reviews:

No comments