ADLINK Technology MVP-5100, User Manual, Page: 30 / 97

20 System Layout
Leading
EDGE COMPUTING
3.1.11 DC Power Input
Figure 3-9: DC Power Input
Table 3-10: DC Power Input Pin Definition
Refer to Section 4.1: Attach DC Power Connector on page 29 to
install the DC Power Connector to the DC Power Input.
Please use an approved power source as certified by IEC or UL.
The maximum ambient operating temperature (Tma) is described
in “Important Safety Instructions”. Altitude during operation is up to
2000 m where output meets LPS and SELV circuit requirements.
Power Source Rating
Pin Signal
1 V+ (DC_IN)
2 V- (DGND)
Voltage Current
DC Power Source 12 to 24VDC 12A to 6A min.
AC-to-DC Adapter 24VDC 6 min.
WARNING:
Before providing DC power, ensure the voltage and polarity pro-
vided are compatible with the DC input. Improper input voltage
and/or polarity can be responsible for system damage.
AVERTISSEMENT: Avant de fournir une alimentation CC,
assurez-vous que la tension et la polarité fournies sont compati-
bles avec l'entrée CC. Une tension d'entrée et / ou une polarité
incorrectes peuvent être responsables de dommages au système.