ADLINK Technology HDV62, User Manual

Page: 48 / 164

Function Library 37
4.3.11 Device Reset
Purpose
This function restores HDV62 device to initial state of booting up.
After resetting, you need to reconfigure all settings and then the
device can work correctly. Call this function only when the device
behaves abnormal and can’t restore it to proper state. The effect
of this function is same as rebooting computer, but save lot of time
of rebooting.
Prototype

C/C++
int Hdv62_DeviceReset (UINT Number)
 C#
int DeviceReset (uint Number)
 VB.Net
DeviceReset (ByVal Number as UInteger) As Integer
Parameters
 Number
The number of device. The allowed value is from 0 to 15.
Return Value
No error occurs if return value >= 0; if negative value, please refer
to Section 4.9 for error information about return codes.