Page 15
Express-IA533
User’s Manual
Page 15
Express-IA533
User’s Manual
Express-HR
User’s Manual
Page 15
Page 15
Express-HR
User’s Manual
5
Pinout and Signal Descriptions
5.1
COM Express
®
Type 6 compatible pinout
All signals on AB and CD connectors of the Express-HR comply with pinouts and conventions
used in the original “
PICMG
®
COM.0 R2.0: COM Express
®
Module Base Specification”
.
95mm.
CD
AB
125mm.
CD Connector
USB3.0
addtional signals to upgrade
4 USB ports on AB to USB230
2 PCI Express Lanes x1
3 DDI Channels
Displayport/HDMI/DVI and SDVO
PCI Express x16 for Graphics
or General purpose PCIe
5.2
Carrier Board Design Guide
The PICMG COM Express Carrier Design Guide is a
160-page document that provides information on
designing a custom carrier board for COM Express
modules. The design guide includes reference
schematics for the external circuitry required to
implement the various COM Express peripheral
functions, explains how to extend the supported buses,
and how to add additional peripherals and expansion
slots to a COM Express-based system. You can
download the document Carrier Design Guide at:
http://www.adlinktech.com/ccps/picmg_comdg_100.pdf
The above function mappings are a generic description of COM
Express pinouts, and not necessarily supported on the module
described in this manual.
AB Connector
1 Gigabit Ethernet port
LPC and SPI bus
4 Serial ATA channels
High Definition Audio
8 USB 2.0 ports
6 PCI Express Lanes x1
Dual 24-bit LVDS channels
Analog VGA
8 GPIO pins
SMBus and I
2
C bus
Fan Control Signals
+12V primary power input
+5V standby and 3V RTC
Summary of Contents for Express-HR
Page 76: ......
