ETX-BT
7
2 Specifications
2.1 General
X
CPU
: Single, dual or quad-core Intel Atom® or Celeron® processor
•
Intel Atom® E3845 1.91 GHz 542/792 (Turbo) 10W (4C/1333)
•
Intel Atom® E3827 1.75 GHz 542/792 (Turbo) 8W (2C/1333)
•
Intel Atom® E3826 1.46 GHz 533/667 (Turbo) 7W (2C/1066)
•
Intel Atom® E3825 1.33 GHz 533 (No Turbo) 6W (2C/1066)
•
Intel Atom® E3805 1.33 GHz 533 (No Turbo, No Graphics) 4W (2C/1066)
•
Intel Atom® E3815 1.46 GHz 400 (No Turbo) 5W (1C/1066)
•
Celeron® N2930 1.83 GHz, 688/854 (Turbo) 7.5W (4C/1333)
•
Celeron® J1900 2 GHz, 688/854 (Turbo) 10W (4C/1333)
•
Celeron® N2807 1.58 GHz 313/750 (Turbo) 4.5W (2C/1333)
Supporting
: Single, dual or quad Out-of-Order Execution (OOE) processor cores,
Intel® VT-x, Intel® SSE4.1 and SSE4.2, Intel® 64 architecture, IA 32-bit ,
PCLMULQDQ Instruction DRNG, Intel® Thermal Monitor (TM1 & TM2)
Note
: Availability of features may vary between processor SKUs.
X
Memory:
Single SODIMM socket for up to 8GB non-ECC 1333/1066 MHz DDR3L
memory
X
Embedded BIOS
: AMI EFI with CMOS backup in 8MB SPI BIOS
X
Expansion Busses
o
PCI 32-bit rev 2.3 at 33 MHz supporting 4 bus masters
o
ISA 16-bit (through LPC-ISA bridge), no DMA support
o
SMBus (system) , I
2
C (user)
X
SEMA Board Controller
: supporting voltage/current monitoring, power sequence,
debug support, AT/ATX mode control, logistics and forensic information, flat panel
control, general purpose I
2
C, watchdog timer
X
Debug Headers
: 40-pin multipurpose flat cable connector for use in combination
with DB-40 debug module providing BIOS POST code LEDs, BMC access, SPI
BIOS flashing,
power test points, debug LEDs
