10
Getting
Started
ADLINK Technology, Inc.
Copyright 2008
2.4 Cabling Laptop Computer to PXI Extension Chassis
Now that you have successfully installed the EC-8560 into the
Host computer and/or installed a PXI device in the PXI extension
chassis, you may connect the Host Computer and PXI extension
chassis with an extension cable.
1. Locate your 3 M extension cable. One end should
already be connected to the EC-8560.
Figure 2-4: 3 M extension cable (ACL-EXPRESS-3)
CAUTION:
Do not remove the extension cable after the system is
powered on. It may cause system errors or data loss. If
the cable is unplugged improperly, reconnect it and
reboot the host PC and extension chassis.
