ADLINK Technology DMI-1210, User Manual

Page: 67 / 103

55
DMI-1210
6 BIOS
6.1 Introduction
The following chapter describes basic navigation for the AMI EFI
BIOS setup utility.
6.2 Entering BIOS Setup
To enter the setup screen, follow these steps:
1. Power on the motherboard
2. Press the < Delete > key on your keyboard when you
see the following text prompt:
< Press DEL to run Setup >
3. After you press the < Delete > key, the main BIOS setup
menu displays. You can access the other setup screens
from the main BIOS setup menu, such as Chipset and
Power menus.
Setup Menu
The main BIOS setup menu is the first screen that you can navi-
gate. Each main BIOS setup menu option is described in this
user’s guide.
The Main BIOS setup menu screen has two main frames. The left
frame displays all the options that can be configured. “Grayed”
options cannot be configured, “Blue” options can be.
The right frame displays the key legend. Above the key legend is
an area reserved for a text message. When an option is selected
in the left frame, it is highlighted in white. Often a text message will
accompany it.
NOTE: NOTE:
In most cases, the < Delete > key is used to invoke the setup
screen. There are several cases that use other keys, such as <
F1 >, < F2 >, and so on.