Windows Driver Installation
57
cPCI-6840
4
Windows Driver Installation
The following sections show the driver installation procedures for
Windows 2000, Windows XP or Windows Server 2003. When
installing the Windows drivers, we recommend the following steps:
1. Fully install the Windows properly before installing any
driver. Most of the standard I/O devices’ driver will be
installed during the standard Windows installation.
2. Install the chipset driver.
3. Install the graphic driver and utilities.
4. Install the LAN drivers.
It is recommended that the chipset, graphic, and LAN drivers pro-
vided on the ADLINK CD be used to ensure compatibility. Please
contact ADLINK for support for Linux drivers and VxWorks BSP.
4.1
Chipset Drivers Installation
1. Ensure Windows 2000/XP/Windows Server 2003 be fully
installed and running prior to executing the “Intel Chipset
Software Installation Utility”.
2. Close any running applications.
3. The files are stored in an integrated application setup
program. This program is designed for a Windows 2000,
XP and Windows Server 2003.
4. Locate the directory X:\cPCI\cPCI-6840\Chipset in the
CD-ROM, and then run “infinst_enu.exe”.
5. Click 'Next' on the Welcome screen to read and agree to
the license agreement. Click Yes if you agree to con-
tinue. NOTE: If you click No, the program will terminate.
6. Click ‘Next’ on Readme Information screen to install INF
files.
7. Click 'Finish' to restart the system when prompted to do
so.
8. Follow the screen instructions and use the default set-
tings to complete the setup when Windows 2000/XP/
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com