ADLINK Technology cPCI-6830 Series Manual Download Page 43 | Manualshive

Page: 43 / 62

background image

Getting Started

•

35

3.3.1

HDD Installation for cPCI-6830

Find the HDD accessory pack inside your original package. (Users
purchasing the OEM model, non-standard, customized or special
configuration model, the HDD accessory package may not be included as
part of the packaging. Please contact ADLINK dealers or sales
repres entatives to purchase this accessory pack P/N: 58-00023-000.)

1.

Check the master/slave setting of your 2.5 ” ATA HDD

2.

Screw the HDD to the drive-mounting bracket. Please note the
orientation of the HDD. The HDD’s pin #1 must match the
location of IDE connector pin #1

3.

Install the HDD with the mounting bracket plate on the module on
the solder side of slot one.

4.

Using three copper stand-offs , screws on the HDD and tighten
the HDD to the module.

5.

Connect the 44-pin HDD cable (44-pin), check if pin #1 of the IDE
connector, cable and the HDD are matched

3.3

BIOS Configuration Overview

This topic presents an introduction to the Phoenix/Award PnP BIOS Setup
Utility. For more detailed information about the BIOS and other utilities, see
the BIOS Manual.

The BIOS has many separately configurable features. These features are
selected by running the built-in Setup utility. System configuration settings
are saved in a portion of the battery-backed RAM in the real-time clock device
and are used by the BIOS to initialize the system at boot up or reset. The
configuration is protected by a checksum word for system integrity.

To access the Setup utility, press the "Del" key during the system RAM check
at boot time. When Setup runs, an interactive configuration screen displays.

Setup parameters are divided into different categories. The available
categories are listed in a menu. The parameters within the highlighted
(current) category are listed in the bottom portion of the Setup screen.
Context sensitive help is displayed in t he right portion of the screen for each
parameter.

Use the arrow keys to select a category from the menu. To display a
submenu, highlight the category and then press the "Enter" key.

StockCheck.com

«
...
41
42
43
44
45
...
»

Summary of Contents for cPCI-6830 Series































































Reviews:

No comments

Related manuals for cPCI-6830 Series

All in One Printer

Brand: Baracoda Pages: 42

Brand: D-Link Pages: 38

Web Smart DES-1210-28P

Brand: D-Link Pages: 6

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 23

Express EtherNetwork DI-604

Brand: D-Link Pages: 7

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 97

Brand: Jabra Pages: 15

Brand: Pima Pages: 4

Brand: Barco Pages: 121

Brand: FS Pages: 19

HHM Series HHM2411

Brand: TDK Pages: 2

kontron KBox E-420-R1K/V1K

Brand: S&T Pages: 82

Brand: AXIOMTEK Pages: 58

Brand: QTech Pages: 406

NVR41-4KS2 Series

Brand: Dahua Pages: 452

Network Scanning Unit A

Brand: Ricoh Pages: 206

Brand: MCT Pages: 12

EZ-KIT LITE ADSP-2191

Brand: Analog Devices Pages: 98

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands