ADLINK Technology cPCI-6630 Series, User Manual

Page: 127 / 139

Checkpoints & Beep Codes 115
cPCI-6630
9 Checkpoints & Beep Codes
The eight User LEDs on the front panel display port 80h POST
codes in hexadecimal during boot up. Users can use the POST
codes to identify issues during the BIOS POST process (see See
“User LEDs” on page 24.).
9.1 Checkpoint Ranges
9.2 Standard Checkpoints
SEC Phase
Status Code Range Description
0x01 – 0x0B SEC execution
0x0C – 0x0F SEC errors
0x10 – 0x2F
PEI execution up to and including memory
detection
0x30 – 0x4F PEI execution after memory detection
0x50 – 0x5F PEI errors
0x60 – 0x8F DXE execution up to BDS
0x90 – 0xCF BDS execution
0xD0 – 0xDF DXE errors
0xE0 – 0xE8 S3 Resume (PEI)
0xE9 – 0xEF S3 Resume errors (PEI)
0xF0 – 0xF8 Recovery (PEI)
0xF9 – 0xFF Recovery errors (PEI)
Status Code Description
0x00 Not used
Progress Codes
0x01 Power on. Reset type detection (soft/hard).
0x02 AP initialization before microcode loading
0x03
North Bridge initialization before microcode
loading
0x04
South Bridge initialization before microcode
loading