ADLINK Technology CoreModule 920, Reference Manual

Page: 13 / 64

Chapter 2 Product Overview
CoreModule 920 Reference Manual 7
Module Features
•
CPU

Provides a 1.7GHz (17W) Intel Core i7 3517UE Processor Core and Graphics Memory Controller
Hub

Provides a DMI (Direct Media Interface) with 2 GB/s of bandwidth in each direction

Provides an FDI (Flexible Display Interface) for carrying display traffic to the PCH

Provides Enhanced Intel SpeedStep® Technology (EIST)

Supports Hyper-Threading Technology

Provides up to 8MB on-die L3 cache

Provides 3D graphics engine

Provides dual-channel DDR3 memory controller (only one channel connected on board)
•
Memory

Provides 2GB of +1.5V DDR3 soldered, on-board memory

Provides double data rate interface

Supports 32-bit data bus

Supports DDR3 1333MHz memory
•
Expansion Buses

PCI bus version 2.3 at 33MHz

PCIe bus version 2.0 at 100MHz
•
SATA Interface

Supports two SATA 3.0 ports from the BD82QM67 PCH

Supports up to 6Gb/second data transfer rate

Supports independent DMA operation

Supports Native Command Queuing

Provides Auto Activate for DMA

Supports Hot Plug features

Provides two standard SATA 3.0 connectors

Supports one SATA 2.0 port dedicated for the SSD (Solid State Drive)
•
Serial Interface

Provides two buffered serial ports (COM1-2) with full handshaking

Provides two 10-pin headers

Provides 16550-equivalent controllers with 16-byte FIFO modes

Supports full-duplex buffering and full status reporting

Supports full modem capability

Supports programmable word length, stop bits, and parity

Provides programmable baud-rate generator