background image

CoreModule 745

Reference Manual

45

Appendix A

Technical Support

ADLINK Technology, Inc. provides a number of methods for contacting Technical Support listed below in 

Table A-1

. Requests for support through the Ask an Expert are given the highest priority, and usually will be 

addressed within one working day. 

ADLINK’s Ask an Expert – This is a comprehensive support center designed to meet all your technical 
needs. This service is free and available 24 hours a day through the ADLINK web page at 

http://www.adlinktech.com/AAE/

. This includes a searchable database of Frequently Asked Questions, 

which will help you with the common information requested by most customers. This is a good source 
of information to look at first for your technical solutions. However, you must register online if you 

wish to use the Ask a Question feature. 

ADLINK strongly suggests that you register with the web site. By creating a profile on the ADLINK 
web site, you will have a portal page called “My ADLINK” unique to you with access to exclusive 

services and account information.

Personal Assistance – You may also request personal assistance by creating an Ask an Expert account 
and then going to the Ask a Question feature. Requests can be submitted 24 hours a day, 7 days a week. 
You will receive immediate confirmation that your request has been entered. Once you have submitted 

your request, you must log in to go to My Stuff area where you can check status, update your request, 

and access other features.

Download Service – This service is also free and available 24 hours a day at 

http://www.adlinktech.com

. For certain downloads such as technical documents and software, you must 

register online before you can log in to this service.

Table A-1.   Technical Support Contact Information

Method

Contact Information

Ask an Expert

http://www.adlinktech.com/AAE/

Web Site

http://www.adlinktech.com

Standard Mail

Contact us should you require any service or assistance. 
 

ADLINK Technology, Inc. 

Address:   9F, No.166 Jian Yi Road, Zhonghe District 
 

New Taipei City 235, Taiwan 

 

ᄅקؑխࡉ೴৬ԫሁ

166

9

 

Tel:  

+886-2-8226-5877 

Fax:  

+886-2-8226-5717 

Email:   [email protected] 

 

Ampro ADLINK Technology, Inc. 

Address:   5215 Hellyer Avenue, #110, San Jose, CA 95138, USA 
Tel:  

+1-408-360-0200 

Toll Free: +1-800-966-5200 (USA only) 
Fax:  

+1-408-360-0222 

Email:   [email protected] 

 

ADLINK Technology (China) Co., Ltd. 

Address: 

Ϟ⍋Ꮦ⌺ϰᮄऎᓴ∳催⾥ᡔುऎ㢇᯹䏃

300

(201203) 

 

300 Fang Chun Rd., Zhangjiang Hi-Tech Park, 
Pudong New Area, Shanghai, 201203 China 

Tel:  

+86-21-5132-8988 

Fax:  

+86-21-5132-3588 

Email:   [email protected] 

 

Summary of Contents for CoreModule 745

























































Reviews: