Chapter 2
Product Overview
10
Reference Manual
CoreModule 430
Header, Connector, and Socket Definitions
describes the headers shown in
Figure 2-4. Connector Pin Identifications
Table 2-2. Header, Connector, and Socket Descriptions
Jack/Plug #
Access
Description
P1A/1B & P1C/1D –
PC/104 Bus
Top/
Bottom
104-pin, 0.100" (2.54mm) connectors for PC/104 (ISA) bus
J2 – Ethernet
Top
8-pin, 0.100" (2.54mm), right-angle header for Ethernet interface
J3 – Serial 1 (COM1)
Top
10-pin, 0.100" (2.54mm), right-angle header for Serial 1 interface
J4 – Parallel (LPT)
Top
26-pin, 0.079" (2mm), right-angle header for Parallel interface
J5 – Utility
Top
10-pin, 0.100" (2.54mm), right-angle header for Utility interface
J6 – IDE
Top
44-pin, 0.079" (2mm) header for IDE interface
J7 – Power
Top
10-pin, 0.100" (2.54mm), right-angle header for Power
connection
J8 – GPIO (User)
Top
10-pin, 0.079" (2mm) header for User defined GPIO signals
J9 – Serial 2 (COM2)
Top
10-pin, 0.100" (2.54mm), right-angle header for Serial 2 interface
J10 – USB0
Top
5-pin, 0.100" (2.54mm), right-angle header for USB0 interface
J11 – Video
Top
44-pin, 0.079" (2mm), right-angle header for LCD/CRT interface
J12 – Compact Flash
Bottom
50-pin, 0.050" (1.27mm) socket for Type I or II Compact Flash
cards
J13 – Serial 4 (COM4)
Top
10-pin, 0.100" (2.54mm) header for Serial 4 interface
J14 – Serial 3 (COM3)
Top
10-pin, 0.100" (2.54mm) header for Serial 3 interface
J15 – DNP
Top
Do not populate
J17 – USB1
Top
5-pin, 0.079" (2mm) header for USB1 interface
J19 – SPI
Top
6-pin, 0.100" (2.54mm) header used for SPI Flash programming
J20 – LPC
Top
10-pin, 0.079" (2mm) header for LPC signals
NOTE
The pinout tables in Chapter 3 of this manual identify pin sequence using the
following methods: A 10-pin header with two rows of pins, using odd/even
numbering, where pin 2 is directly across from pin 1, is noted as 10-pin, 2 rows, odd/
even (1, 2). Alternately, a 20-pin connector using consecutive numbering, where pin
11 is directly across from pin 1, is noted in this way: 20-pin, 2 rows, consecutive (1,
11). The second number in the parenthesis is always directly across from pin 1. See
20-pin, two rows,
Consecutive, (1, 11)
Or
1
2
3
4
5
6
7
8
9
10
20
19
1
2
4
15
11
20
10
5
3
20-pin, two rows,
Odd/Even, (1, 2)
CM430_ConNum_a
Summary of Contents for CoreModule 430
