ADLINK Technology AmITX-CF-I, User Manual

Page: 46 / 66

40
BIOS Setup
7.3.4 NCT6106D Super IO Configuration
Feature Options Description
NCT6106D Super IO
Configuration
Super IO Chip NCT6106D
Serial Port 1 Configuration Set Parameters of Serial Port 1.
Serial Port 2 Configuration Set Parameters of Serial Port 2.
Serial Port 3 Configuration Set Parameters of Serial Port 3.
Serial Port 4 Configuration Set Parameters of Serial Port 4.
Serial Port 5 Configuration Set Parameters of Serial Port 5.
WatchDog Count Mode
Second
Minute
WatchDog Count Mode Selection.
WatchDog TimeOut Value 0 Fill WatchDog Timeout Value, 0 means disabled.
Chassis Opened Warning
Disabled
Enabled
Select whether to enable Chassis Intrusion Detection.
Chassis Intrusion Detection is a utility that can tell
whether someone has opened the case (intruded into
the chassis).
Note: If chassis tamper occurs, you can only enter
setup to clear this error.
ErP/EuP S5 Support
Disabled
Enabled
Enable/Disable ErP/EuP S5 Support.
Note: When MEBx is enable Activate Network Access,
this function can not set enable that will cause ME fail
on next boot.
7.3.4.1 Serial Port 1 Configuration
Feature Options Description
Serial Port 1 Configuration
Serial Port Disabled
Enabled
Enable or Disable Serial Port (COM).
Device Setting IO=3F8h; IRQ=4;
Change Settings
Auto
IO=3F8h; IRQ=4
IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;
IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;
IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;
IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;
Select optimal settings for Super IO Device.
COM Mode Select
RS232
RS485 Half Duplex
RS422 Full Duplex
Configure the COM Port Mode.