ADLINK Technology AdvancedMC AMC-8100, User Manual

Page: 65 / 76

Front Panel Indicators 51
AMC-8100
8 Front Panel Indicators
The faceplate of the AMC-8100 module has 3 LED indicators. The
figure and table that below describe their functions.
Figure 8-1: AMC-8100 Front Panel Indicators
Indicator Color State Function
Hot Swap (
HS
) Blue
On
Management power available to
the module and the module can
safely be extracted
Off
The module is operational and is
unsafe for extraction
Long
Blink
Delay before module is
activated
Short
Blink
Delay before module is de-
activated
Fault or “Out of Service”
(
OOS
)
Red
On
Module Fault set by Shelf
manager or
12V payload power not
detected.
Off
No module fault
12V payload power is being
supplied to board
Module Heartbeat
Activity (
ACT
) and
“in service”
Green
Blink
Fibre Channel Controller heart
beat. Blinks to show FC internal
processor status.
Off
12V payload power is not
detected
1 0
Out of Service
(OOS)
Port Activity LEDs
Module Activity
(ACT)
4Gb SFP Connectors
Hot Swap
(HS)