Getting Started
11
2.3
Installation
After opening the packaging, remove the card and place it on a
grounded anti-static surface with component side up. Locate the
ADLINK All-in-one CD also packaged in the carton and have this
user’s manual and any associated documentation ready for refer-
ence.
Installing Software
X
Insert the ADLINK All-in-one CD in your target system and
follow the graphical user interface.
X
Install Drivers depending on your system/card require-
ments:
Z
Choose either DAQPilot: ADLINK’s Next-Generation
Driver accessible at ( www.adlinktech.com/TM/DAQPi-
lot.html ), or;
Z
Legacy Drivers for older operating systems or propri-
etary software systems (included on the ADLINK All-in-
one CD).
X
Install the system manager, DAQManager, included on the
All-in-one CD and accessible using the graphical user inter-
face.
X
Locate your PCI-6208/6216-GL Series card and continue
device installation.
NOTE:
NOTE:
Also see Chapter 3 for Supporting Software details.
