Adler MMA-175 Instruction Manual Download

Page: 8 / 11

5. INSTALLATION

WARNING! CARRY OUT ALL INSTALLATION OPERATIONS AND ELECTRICAL CONNECTIONS

WITH THE WELDING MACHINE COMPLETELY SWITCHED OFF AND DISCONNECTED FROM THE

POWER SUPPLY OUTLET. THE ELECTRICAL CONNECTIONS MUST BE MADE ONLY AND

EXCLUSIVELY BY AUTHORISED OR QUALIFIED PERSONNEL.

5.1 Preparation

Unpack the welding machine, assemble the separate parts from the package.

5.1.1 Assembling the return cable-clamp

5.1.2 Assembling the welding cable-electrode holder clamp

5.2 HOW TO LIFT THE WELDING MACHINE

All the welding machines described in this handbook should be lifted using the handle or strap (if provided) for the

particular model.

5.3 POSITION OF THE WELDING MACHINE

Choose the place to install the welding machine so that the cooling air inlets and outlets are not obstructed

(forced circulation by fan, if present); at the same time make sure that conductive dusts, corrosive vapors,

humidity etc. will not be sucked into the machine. Leave at least 250mm free space around the welding machine.

WARNING! Position the welding machine on a flat surface with sufficient carrying capacity for its weight, to

prevent it from tipping or moving hazardously.

Summary of Contents for MMA-175











