Adler ADCHARGER 15, Instruction Manual, Page: 9 / 11

COMPLETION OF CHARGING
When the battery “
Full Charge
” LED goes on, this mean the
battery is fully charged. The battery charger will now go into the
maintenance mode.
If the AC plug is pulled off from the mains supply, the battery
charger will turn off. The charging mode and status will be
recorded in the charger’s memory for 15min. Afterward it will reset
to the Standby mode. It helps to avoid any power failure, and
once power comes back, the charger will resume the charging
process at the previous mode.
If the DC clamps were pulled off from the battery while the AC
plug is still connected to the mains supply, the charger will
automatically switch back to the standby mode.
Try to avoid
disconnecting the DC clamps while the AC socket is still
connected to power.
CHARGING TIME
The table below is a guide to the typical charge time for different
sizes of 12V/6 cells battery:
Battery Size Charging Time
20Ah 3 hours
30Ah 4 hours
44Ah 5 hours
55Ah 6 hours
75Ah 8 hours
96Ah 10 hours
120Ah 13 hours