Adler AG 745-34 Speedpocket, Manual

Page: 25 / 38

2.10.2 Adjusting the corner knives
Caution: Danger of injury!
Switch the main switch off.
Adjust the corner knives only with the sewing unit switched off.
–
Swing the corner knife station out (see chapter 2.10.1)
Setting the angle of the corner knives
The angle of the corner knife is adjusted by turning the knife blocks 2
and 4.
–
Loosen screws 1 and 3.
–
Turn the knife blocks 2 and 4 equally.
–
Tighten screws 1 and 3.
–
Adjust the angle of the other pair of knives correspondingly.
Height of the corner knives
The corner knives are not height-adjustable.
The knives always cut through completely.
–
Swing the corner knife station in (see chapter 2.10.1).
Seam beginning Seam end
Straight pocket corners
Right and left corner knife
incisions lie parallel
Position of the adjustable knife block
The position of the adjustable knife block corresponds to the seam
length L1.
–
Loosen clamping lever 5 and set seam length L1 on scale 6.
–
Tighten clamping lever 5.
25
4 3 2 1
6 5