Adkins Hobby Jack, Operator'S Manual

Page: 6 / 20

To avoid a circuit overload, do not operate another high wattage appliance on the same
circuit.
SAVE THESE INSTRUCTIONS:
More specifically
DO NOT let children or untrained persons use your Hobby Jack heat press without
supervision.
NEVER immerse your Hobby Jack heat press, power cable or plug in any liquid.
DO NOT leave your Hobby Jack heat press unattended with fabrics or very flammable
materials.
DO NOT leave your Hobby Jack heat press unnecessarily plugged in. Always disconnect
the plug from the outlet socket when the appliance is not in use.
NEVER touch the appliance with wet or damp hands.
DO NOT use the power lead or your Hobby Jack heat press in order to pull the plug out
of the outlet socket.
DO NOT leave your Hobby Jack heat press exposed to the weather (rain, sun etc.)
DO NOT leave your Hobby Jack heat press unsupervised when it is connected to the
power outlet.
Please note!
Do not use chemical agents or harsh cleaning agents to clean your Hobby Jack heat press
or immerse in liquid.
CONNECTING TO POWER
Before switching on your Hobby Jack heat press make sure that the voltage of your
electricity supply is the same as that indicated on the rating plate.
This appliance may be fitted with a non-rewireable plug. If it is necessary to change the
fuse in a non-rewireable plug the fuse cover must be refitted if the fuse cover is lost or
damaged. The plug must not be used until a replacement cover is obtained.
It is important that the colour of the replacement fuse cover corresponds with the colour
marking on the fuse. If the plug has to be changed because it is not suitable for your
socket or the original becomes damaged, it should be cut off and an appropriate plug
fitted, following the wiring instruction below. The damaged plug that is removed must be
disposed of safely, as insertion into a power outlet socket is likely to cause an electrical hazard.
1.
2.
3.
Special instructions
2
Operators Manual
Special instructions
3