Operating Instructions
Menu:
use up & down buttons to choose, press enter to select then use up & down to adjust
and enter to save.
Operating Modes:
● Sound activation
– The unit will activated by the sound signal.
● Static display
– The unit will display a static color.
● Auto Mode
-The unit will automatically chase through the different patterns.
● DMX control mode
-This function will allow you to control the lighting with a standard DMX
512 controller.
● Smart Phone App Control
Sound Activation:
To operate your light in “sound active” mode, use the up or down buttons until you highlight
“SOUND”, press “enter”. Choose the sound mode effect you would like: 1=Color Change to
music, 2=Strobe to music, 3=Pulse to music, 4=Auto Mix of the other 3 sound active modes.
After you choose one press enter and then you can use the up & down buttons to adjust the
sensitivity.
Static Color without a controller:
To set your EZ Up-Light to a static color without a controller is very easy. Press the up or
down buttons until you highlight “”COLOR”, press “enter”. You now have two choices, you can
choose “Static Color” and easily choose from our 32 preset colors or you can choose “Custom
Color” and build your own color by adjusting the level of each primary color. Note: “enter”
saves the color and “menu” takes you backward.
Auto Mode
:
To set your EZ Up-Light to operate in “auto” mode without a controller is very easy. Press the
up or down buttons until you highlight “”Shows”, press “enter”. Select the auto show mode you
would like to use and press enter. You can then adjust the speed with the up and down
buttons. Note: the “Wifi Mode” is used to control your EZ-Up-Light from a smart phone app
such as: LEDHome More on that subject below under: Smart Phone App Control.
Setting Light to work with the Adkins EZ-Control 6
To set your EZ Up-Light to operate using an Adkins EZ-Control 6 controller is very easy. Press
the up or down buttons until you highlight ”Set”, press “enter”. Press “enter” again and make
sure your light is set to “6CH” (if not then press “enter”, click “down” button to change it and
then click “enter to save it and “menu to go back), press “menu” one more time to get back to
the main menu.
Press the up or down buttons until you highlight ”DMX”, press “enter”. Use up or down to set
to “A001”. That’s it!
Make sure your wireless on the controller is set to the same color as the light fixture.
DMX Mode:
Operating through a DMX controller gives the user the freedom to create their
own programs tailored to their own individual needs. This function also allows you to use
your fixtures as pattern changing lights.
5
