Page 6
2. Installation
2.1
Transport instructions
The machine comes to you
in a box. If you have to transport the
machine at any time it is recommended that you use a similar box and
packing methods. Please let the machine cool down and lower the
handle to the locked position.
2.2
Installing the machine
2.2.1
Remove all
packaging from the heat press.
2.2.2
Check to ensure
that no damage has been caused to the
machine during transit.
2.2.3
Place the machine
on a sturdy horizontal surface that is
within easy reach of the operator and allow space for the
handle to move up to the loading position. Ensure that no
items vulnerable to heat radiation are too close to the
machine and that local lighting is adequate.
2.3
Electrical requirements
The Beta Pocket Press should
be connected to the mains supply,
(nominally 230-240 Volts AC for the European Market by the mains
cable provided and a suitable plug. A qualified person should carry
out this work.
The press is designed
for 230-240 Volts AC ± 50/60 hertz and
requires exclusive use of a power outlet rated for at least 10 amps
(Europe).
Ensure that
the supply rating on the machine specification plate
corresponds with your local supply and that the correct plug is fitted.
MAINS LEAD
The wires
in this mains lead are coloured in accordance with the
following code:
Green and Yellow:
EARTH
230 VAC
Blue:
NEUTRAL
Brown:
LIVE