background image

 

                                                     

Page 18 

7.  Guarantee (Limited Warranty)

 

 

 
 

A. Adkins & Sons Limited 

warrants that the press is free from defects in 

material  and  workmanship  (excluding  Pressing  Pad  Assembly)  for  a 
period of 12 months from the date of supply.  The machine comes with 
a lifetime warranty on the heating element, one year warranty on parts 
and 90 days labour. 
 

This  warranty  covers 

all  parts  to  repair  the  defects,  except  when 

damage results from misuse or abuse, accident, alteration or negligence 
or when a machine has been improperly installed. 
 

If  a  press  covered  by  warranty

  should  need  to  be  returned  to  the 

factory for examination and repair, if on-site component replacement is 
not possible, A. Adkins & Sons Limited will make every effort to repair 
the  customers  press.  The  warranty  will  only  be  effective  when  A. 
Adkins &  Sons  Limited  authorises  the original  purchaser to return  the 
machine to the factory and only when the product upon examination has 
proven to be defective. 
 

Should in our opinion

 any part of this press be defective in materials or 

workmanship,  it  will  be  replaced  or  repaired  free  of  charge,  provided 
that the press has been installed and operated in the correct manner and 
not  subjected  to  misuse.  If  A.  Adkins  &  Sons  Limited  authorise  a 
replacement press, the warranty of the replacement press shall expire on 
the anniversary date of the original machines invoice to the customer. 
 

In  order  for  this  warranty  to  be  effective

,  no  return  of  machine  or 

parts  may  be  made  without  prior  factory  authorisation.  (This  will 
exclude  any  travelling  and/or  carriage  costs  which  will  be  charged  at 
our discretion). 
 

This  is  the  sole  warranty  given  by  the  company

;  there  are  no 

warranties, which extend beyond the description on the face hereof. The 
seller  disclaims  any  implied  warranty  of  merchantability  and/or  any 
implied  warranty  of  fitness  for  a  particular  purpose;  the  buyer  agrees 
that  the  goods  are  sold  “as  is”.  A.  Adkins  &  Sons  Limited  does  not 
warrant  that  the  functions  of  the  press  will  meet  the  customer’s 
requirements  or  expectations.  The  entire  risk  as  to  use,  quality  and 
performance of the press lies with the customer. (No claim of any kind 
shall be greater than the sale price of the product or part to which the 
claim is made). 
 

In no event will A. Adkins & Sons Limited 

be liable for any injury, 

loss  or  damage,  including  loss  of  profits,  destruction  of  goods  or  any 
special,  incidental,  consequential  or  indirect  damages  arising  from  the 
use of the press or accompanying materials. This limitation will apply 
even  if  A.  Adkins  &  Sons  Limited  or  its  authorised  agent  had  been 
advised of the possibility of such damage. 

Summary of Contents for Beta Maxi























Reviews: