Page 11
Hints and Tips (Cont.)
2.
Article
having transfers applied is locked in contact between
pressing pad and heat plate.
3.
Pressing pad
is in good condition, is flat and making complete
contact over the whole area of the heat plate. See Pressing Pad
details.
“Ghosting” (Double Image) of Transfer Prints
Check
:-
1.
Material being used
has been correctly heat set for transfer
printing.
2.
Material being used
does not shrink during printing process,
i.e. measure material before and after printing.
3.
Transfer paper
does not move after printing process upon lift
off of the heat plate.
4.
If possible
, use adhesive coated paper, particularly to
overcome fabric shrinkage.
5.
By pre-shrinking
of material in press before transfer printing.
