Introduction:
Congratulations and thank you for purchasing the American DJ WiTECH8. The WiTECH8 was designed for DJs,
Bands, Bars/Clubs, and Moblie Entertainers that want easy On/Off control of up to 8 fixtures. The WiTECH8
has one 6,3mm output jack for UC3 control and 8 power jacks. The WiTECH8 is compact and light-weight, and
can be mounted on truss, lighting stands, wall, or ceilings. The WiTECH8 control has a transmitting distance
of 325ft. or 100 meters. With the wireless remote you are able to control Stand By (Black Out), Function, and
Mode for each output. Please refer to your units user manual for its UC3 functions and controls.
Customer Support:
American DJ® provides a toll free customer support line, to provide set up help and to
answer any question should you encounter problems during your set up or initial operation. You may also visit
us on the web at www.americandj.com for any comments or suggestions.
For service related issue please con -
tact American DJ®.
Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.
Voice:
+31 45 546 85 00
Fax:
+31 45 546 85 99
E-mail:
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing
so will void your manufactures warranty. In the unlikely event your unit may require service please contact
American DJ customer support.
The WITEC H8 carries a 1 Year (365 days) limited warranty. Please fill out the enclosed warranty card to vali -
date your purchase. All returned service items whether under warranty or not, must be freight pre-paid and
accompany a return authorization (R.A.) number. If the unit is under warranty you must provide a copy of your
proof of purchase invoice. Please contact American DJ® customer support for a R.A. number. For additional
warranty info please visit our website.
***THIS SYSTEM HAS BEEN SYNCHRONIZED AT THE FACTORY AND IS READY FOR USE RIGHT OUT OF THE BOX
***
If your system becomes unsychronized you can follow the steps below to resync.
WiTECH8 SET UP AND SYNCH:
When using the WiTECH8 please refer to your units user manual for its UC3 functions and
controls. Please see other side for the WiTECH8 controls and functions.
1. Using a 6,3mm jack cable, connect one end of the cable to the 6,3mm jack on the back of your desired UC3
compatiable fixture and the other end of the cable to the 6,3mm jack located on the WiTECH Receiver. Turn on the Receiver.
2. Once you have your unit(s) connected to the WiTECH Receiver press the SET UP (7) button located on top of the Receiver,
the RF SIGNAL LED (8) will begin to flash.
3. Once the RF SIGNAL LED (8) is lit, press any button on the WiTECH8 Controller. Once you press any button, the RF
SIGNAL LED (8) will turn off. This lets you know that the set up process is complete and you can begin controlling your
connected unit(s).
4. You can also use the connected unit as a master unit, and connect up to 7 more slave units. Please see your units user
manual for master-slave configuration. Use any unused power jacks on the WiTECH8 to plug in and provide power for your
slave units.
Specifications:
Voltage...................................................................................................................................................................240V/50Hz
Frequency................................................................................................................................................................................433.9Mhz RF (Radio Frequency)
Wireless Transmitting Distance.............................................................................................................................................................................................100M
Max. Load..................................................................................................................................................................................5A per Channel, 15A Total at a time
Breaker.....................................................................................................................................................................................................................16A
WiTECH Dimensions.......................................................................................................................................................................724 (L) x 105 (W) x 80mm (H)
WiTECH Weight...........................................................................................................................................................................................................................2.7Kg
