ADJ Products, LLC - www.adj.com - WiFly EXR HEX Par User Manual Page 19
ADJ Products, LLC - www.adj.com - WiFly EXR HEX Par User Manual Page 18
WiFly EXR HEX Par 6 Channel Mode
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 WHITE
0 - 255 0% - 100%
5 AMBER
0 - 255 0% - 100%
6 UV
0 - 255 0% - 100%
WiFly EXR HEX Par 7 Channel Mode
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 WHITE
0 - 255 0% - 100%
5 AMBER
0 - 255 0% - 100%
6 UV
0 - 255 0% - 100%
7 MASTER DIMMER
0 - 255 0% - 100%
WiFly EXR HEX Par ADJ RFC Operation
The ADJ
RFC
remote
(sold seperately) has many different functions and al-
lows you to control your WiFly EXR HEX Par from long distance. The ADJ
RFC
remote can control your system up to 150 ft. To use the RFC you must
first activate the fixtures receiver, to activate the receiver please see the in-
structions on page 14.
BLACkOUT
-
Pressing this button will blackout the fixture. Press this button
for more then 3 seconds to return to default settings.
AUTO RUN
-
Pressing this button will cycle through auto run, color change
mode, and color fade mode. In the color change and color fade modes
you can use the “+” and “-” buttons to find scroll through the 16 different
programs. You can control the speed of each of the modes by pressing the
SPEED button and using the “+” and “-” buttons.
PROGRAM SELECTION
-
Pressing this button will activate static color
mode. Use the “+” or “-” to scroll through the 63 static colors. Once you
have found your color, you can press the FLASH button to activate strobing
and use the “+” or “-” to adjust the flash rate.
FLASH
-
This button will activate the flash (strobe) effect. You can control
the flash speed using the “+” and “-” buttons.
SPEED
-
Press this button and use the “+” & “-” buttons to adjust the speed
in Program mode.
SOUND ACTIVE -
This button activates sound active mode. Use the “+” or
“-” to choose from 1 of 16 sound active modes. Press this button again to
enter sound sensitivity adjustment. Use the “+” or “-” buttons to adjust the
sound sensitivity.
R G B W/A -
Press either one of these buttons and use the “+” or “-” to ad-
just the brightness. Press the FLASH button to activate strobing and use
the “+” or “-” buttons to adjust the Flash rate. Note: Use the W/A button to
choose white, amber, & UV. Each press of this button will change to the next
color.
“+” and “-” -
Use these buttons to adjust the flash rate, select your desired
program, adjust the color change speed, color fade speed, auto run speed,
RGBWA & UV brightness, and to scroll through the Static colors.
