ADJ Products, LLC - www.adj.com - WiFly EXR Dotz Par User Manual Page 13
ADJ Products, LLC - www.adj.com - WiFly EXR Dotz Par User Manual Page 12
WiFly EXR Dotz Par System Menu
unit to return to when power is applied.
1. Press the MODE button until “NO DMX” is displayed. The cur-
rent No DMX setting will appear underneath.
2. Press the ENTER button and a flashing underscore will appear
underneath the current No DMX setting. Use the UP or DOWN
buttons to find an operating mode you would like the unit go into
when the DMX signal is lost.
• Fade - If the DMX signal is lost or interrupted, the unit will auto-
matically go into the fade program.
• Blackout - If the DMX signal is lost or interrupted, the unit will
automatically go into stand by mode.
• Hold - If the DMX signal is lost or interrupted, the fixture will stay
in the last DMX setting.
3. Press ENTER to confirm your desired set up.
Sound Active Mode
- In this mode the unit will run in
sound active mode.
1. Press the MODE button until “SOUND SENS: XX” is displayed.
“XX” is the current sound sensitivity setting.
2. Press the ENTER button and a flashing underscore will appear
under the sound sensitivity setting. Use the UP and DOWN but-
tons to adjust the sound sensitivity. “00” being the least sensi-
tive, and “31” being the most.
RF Active
- This function will let you activate the RF
remote control.
1. Press the MODE button until “RFREMOTE” is displayed. Either
“On” or “Off” will appear underneath.
2. Press the ENTER button and a flashing underscore will appear
under the setting. Use the UP or DOWN buttons to activate (On)
or deactivate (Off) the remote control.
WiFly EXR Dotz Par System Menu
RGB Dimmer Mode
- Select your desired color to
remain static or adjust the RGB colors to create your desired
color.
1. Follow instructions 1-2 under Built-In Programs.
2. Press the UP or DOWN buttons so that “1. Manual” is dis-
played, and press ENTER.
3. A flashing underscore will appear underneath the first color
adjustment. Use the UP and DOWN buttons to adjust the color
intensity to your liking. Press ENTER to set the color and move
to the next color adjustment.
4. Continue to adjust the colors until you find your desired set-
ting. Press the ENTER button until the underscore is located
under “SXX”. “XX” represents the current strobe setting.
5.
Use the UP and DOWN buttons to adjust the strobe speed or
completely turn it off. The “00” setting turns the strobe off, “01”
is the slowest strobe rate, and “99” is the fastest strobe rate.
Press ENTER once you find your desired strobe setting.
Color Macro
- Select your desired color macro to remain
static.
1. Press the MODE button until “MACRO” is displayed. The cur-
rent color macro setting is located underneath.
2. Press the ENTER button and the flashing underscore will
appear under the color macro number. Use the UP and DOWN
buttons to scroll through the 32 color macros until you find your
desired color then press the ENTER button.
NO DMX
- This mode can be used as a precaution mode,
that in case the DMX signal is lost, interrupted, or power is
lost, the operating mode chosen in the setup is the running
mode the fixture will go into when the DMX signal is lost. You
can also set this as the operating mode you would like the
