background image

4

G E N E R A L  I N F O R M AT I O N

INTRODUCTION

Please read and understand the instructions in this manual carefully and thoroughly before attempting 

to operate this device. These instructions contain important safety and use information.

This product is intended for use by professionally trained personnel only, and is not suitable for 

private use.
Unpacking

Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully 

check the shipping carton for damage that may have occurred during shipping. If the carton is damaged, 

carefully inspect the device for damage, and be sure all accessories necessary to install and operate 

the device have arrived intact. In the event damage has been found or parts are missing, please contact 

our customer support team for further instructions. Please do not return this device to your dealer 

without first contacting customer support. Please do not discard the shipping carton in the trash. Please 

recycle whenever possible.
BOX CONTENTS

Omega Brackets

1.83M locking power cable
CUSTOMER SUPPORT

Contact ADJ Service for any product related service and support needs.

Also visit 

forums.adj.com

 with questions, comments or suggestions.

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

323-582-2650 | Fax: 323-832-2941 | 

[email protected]

ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET 

+31 45 546 85 60 | Fax: +31 45 546 85 96 | 

[email protected]

REPLACEMENT PARTS please visit 

parts.adj.com

I M P O R TA N T   N O T I C E !

THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.

DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR MANUFACTURER’S 

WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO THIS FIXTURE AND/OR THE 

DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE 

MANUFACTURER’S  WARRANTY AND ARE  NOT  SUBJECT  TO  WARRANTY  CLAIMS AND/OR 

REPAIRS.

Summary of Contents for VIZI WASH Z37












































Reviews: