ADJ Products, LLC - www.adj.com - Saber Spot RGBW Instruction Manual Page 16
ADJ Products, LLC - www.adj.com - Saber Spot RGBW Instruction Manual Page 17
The UC IR (sold separately) infrared remote gives you control of
various functions (See below). To control the fixture you must aim the
remote at the front of the fixture and be no more than 30 feet away.
The Saber Spot RGBW is also compatible with the Airstream
IR app. The IR transmitter is available through any ADJ dealer or
through the ADJ parts website. Plug the transmitter into the head-
phone jack of your iOS phone or tablet. To control your IR fixture you
must raise the volume to the maximum on your iOS phone or tablet
and aim the transmitter at the front of the fixture and be no more
than 15 feet away. After you have purchased the Airstream IR trans-
mitters, the app is a free download from the app store for your iOS
phone or tablet. The app comes with 3 pages of control depending
on the IR fixture you are using. Please see below for IR functions in-
cluding the corresponding app page.
Works with App page 1.
STAND BY
-
Press this button to go into DMX mode or IR active.
FULL ON
-
Press this button to fully light up the unit.
STROBE
-
Press this button to activate strobing. Use the “Dimmer
+/- to adjust the strobe rate.
FADE/GOBO
-
Press this button to activate show mode. Continue to
press this button to find your desired show.
“” and “DIMMER -” -
Use these buttons adjust the strobe
rate and output intensity in color mode.
COLOR
-
Press this button to activate static color mode. Continue to
press this button to cycle through the different colors.
1-9
-
These buttons are invalid for this fixture.
SOUND ON & OFF -
These buttons are invalid for this fixture.
SHOW 0 -
This button is invalid for this fixture.
Saber Spot RGBW
UC IR Operation
Saber Spot RGBW
UC IR Operation