ADJ Products, LLC www.adj.com - RGBW4C IR Page 8
ADJ Products, LLC www.adj.com - RGBW4C IR Page 9
RGBW4C IR
Controls and Functions
1. FIXTURE SELECTION - The RGBW4C IR can control up to 8 LED fix-
tures. Press one of the buttons and the corresponding LEDs above the
button will light indicating which LED fixture can be controlled.
Example: Press the 1/5 button one time and the left LED will light indicating
that fixture 1 can now be controlled. Press the button a second time and
the right LED will light, indicating that fixture 5 can now be controlled. Press
the button a third time and both LEDs will light, indicating that both fixtures
can now be controlled. When you press the button the fourth time both
LEDs will turn off, indicating that you cannot control the fixtures.
2. CHASE BUTTON - Press this button to activate chase mode. Press
any of the color buttons in the COLORS/CHASES grid (14) to select
your desired chase.
3. BLACKOUT - Activates and deactivates blackout mode
4. COLOR MACROS - Press this button to activate the COLOR
MACROS. The COLOR MACROS can be controlled using the following:
- The RED/SPEED FADER (13) will create your own color to remain
staic.
- The GREEN/FADE TIME FADER (12) will control the fade speed.
- The BLUE/MASTER DIMMER FADER (11) will control the RGB LEDs
intensity.
- The WHITE/WHITE DIMMER FADER (10) will control the white LEDs
intensity.
5. MANUAL RGBW - Pressing this button activates manual RGBW.
When this mode is active you can press any of the color buttons
located in the COLORS/CHASE grid (14). You can also use the RED/
SPEED FADER (13) to control the red LEDs intensity, the GREEN/FADE
TIME FADER (12) to control the green LEDs intensity, etc.
6. AUTO PROGRAM - Pressing this button will activate the auto pro-
gram. The Auto Program can be controlled using the following:
- The RED/SPEED FADER (13) will control the program speed.
- The GREEN/FADE TIME FADER (12) will control the fade speed.
- The BLUE/MASTER DIMMER FADER (11) will control the RGB LEDs
intensity.
- The WHITE/WHITE DIMMER FADER (10) will control the white LEDs
intensity.
7. STROBE - Activates and deactivates strobing. Use the RED/SPEED (13)
fader to adjust the strobe speed.
8. RGB FADE - Pressing this button activates RGB FADE.
RGBW4C IR
Controls and Functions
The RGB FADE can be controlled using the following:
- The RED/SPEED FADER (13) will control the program speed.
- The GREEN/FADE TIME FADER (12) will control the fade speed.
- The BLUE/MASTER DIMMER FADER (11) will control the RGB LEDs
intensity.
- The WHITE/WHITE DIMMER FADER (10) will control the white LEDs
intensity.
9. SOUND ACTIVE MODE - Pressing this button will activate the sound
active mode, the sensitivity of the sound active mode can be adjusted
using knob located on the rear of the controller. Other adjustmenst can
be made using the following:
- The GREEN/FADE TIME FADER (12) will control the fade speed.
- The BLUE/MASTER DIMMER FADER (11) will control the RGB LEDs
intensity.
- The WHITE/WHITE DIMMER FADER (10) will control the white LEDs
intensity.
10. WHITE/WHITE DIMMER FADER - Use this fader to control the output
intensity of the white LEDs.
11. BLUE/MASTER DIMMER FADER - This fader has two functions.
- This fader can be used to control the blue LEDs intensity in MANUAL
RGBW MODE.
- In AUTO PROGRAM, CHASE MODE, RGB FADE, COLOR MACROS,
& SOUND ACTIVE MODE this fader will control the RGB LEDs output
intensity.
12. GREEN/FADE TIME FADER - This fader has two functions.
- This fader can be used to control the green LEDs intensity in
MANUAL RGBW MODE.
- In AUTO PROGRAM, CHASE MODE, RGB FADE, COLOR MACROS,
& SOUND ACTIVE MODE this fader will control the fade time.
13. RED/SPEED FADER - This fader has three functions.
- This fader can be used to control the red LEDs intensity in MANUAL
RGBW MODE.
- In AUTO PROGRAM, CHASE MODE & RGB FADE this fader will con-
trol program speed.
- In COLOR MACROS MODE this fader will create your color to remain
static.
14. COLORS/CHASES/PRESETS - Press the COLOR buttons to activate
desired COLOR MACROS, or when in CHASE MODE the color buttons
will activate chases. See the built-in chases on page 10.
