FEATURES
8 Channel 120V 3-Prong Sockets (rear panel)
8 Lighted Channel On/Off Rocker Switches (front panel)
Resettable 15A NFB (No Fault Breaker)
4.9 ft (1.5m) Attached Main 3-Prong Power Cord
19-inch 1-Space Rack Mountable (rack screws not included)
SPECIFICATIONS
120V 60Hz Operation ONLY
Maximum Load per Channel 10A
Maximum Total Load 15A or 1800W
Dimensions: L 19.0” (483mm) x W 5.0” (127mm) x H 1.7” (44m)
Weight: 4 lbs. (1.8kg)
SAFETY GUIDELINES
PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED!
DO NOT EXCEED 10A PER CHANNEL OR DO NOT EXCEED 15A TOTAL AMPS!
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS DEVICE!
DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR MANUFACTURES WARRANTY.
DAMAGES RESULTING FROM MODIFICATIONS TO THIS DEVICE AND/OR THE DISREGARD OF THESE SAFETY
GUIDELINES VOID THE MANUFACTURES WARRANTY AND ARE NOT SUBJECT TO ANY WARRANTY CLAIMS
AND/OR REPAIRS. ONLY USE ORIGINAL PACKAGING AND MATERIALS TO TRANSPORT THE DEVICE IN FOR
SERVICE.
DO NOT OPERATE DEVICE IF POWER CORD IS FRAYED, CRIMPED, DAMAGED AND/OR IF ANY OF THE POWER
SOCKETS ARE DAMAGED AND/OR POWER CORDS OF DEVICES DO NOT INSERT INTO THE REAR SOCKETS
SECURELY WITH EASE. DO NOT PLUG DEVICE INTO A DIMMER PACK!
NEVER OPEN THIS DEVICE WHILE IN USE! KEEP FLAMMABLE MATERIALS AWAY FROM DEVICE!
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE DEVICE TO RAIN AND/OR MOISTURE!
FOLLOW STEPS BELOW TO INSTALL PC-100A IN A 19-INCH RACK
1. Connect up to 8 device power cords to the 8 Channel power sockets on the rear panel.
2. Connect the attached main power cord from the PC-100A to a suitable power source.
3. Install and secure PC-100A with rack screws. (rack screws not included - see image below)
DIMENSIONAL DRAWINGS