ADJ M-101HD, User Manual, Page: 8 / 18

8
M A I N T E N A N C E G U I D E L I N E S
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
CLEANING
Frequent cleaning is recommended to insure proper function, optimized light output, and an
extended life. The frequency of cleaning depends on the environment in which the devices operates
in: damp, smoky or particularly dirty environments can cause greater accumulation of dirt on the
mirror ball and/or light fixture optics. Clean the external lens of the mirror ball surface and the front
lens of the light at least every 20 days with a soft cloth to avoid dirt/debris accumulation
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life.
There are no user serviceable parts inside these devices, please refer all other service issues to an
authorized ADJ service technician. Should you need any spare parts, please order genuine parts
from your local ADJ dealer.
Please refer to the following points during routine inspections:
A detailed review by an approved electrical engineer every three month, to make sure the circuit
contacts are in good condition and prevent overheating.
Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during
normal operation resulting in damage or injury as larger parts could fall.
Check for any deformations on the mirror ball, mirror ball motor, and light housings, lenses, rigging
hardware and rigging points (ceiling, suspension, trussing). Deformations could allow for dust to
enter into the devices. Damaged rigging points or unsecured rigging could cause the devices to fall
and seriously injure a person(s).
Electric power supply cables must not show any damage, material fatigue or sediments.