ADJ INNO POCKET Z4, User Instructions

Page: 8 / 16

ADJ Products, LLC - www.adj.com - Inno Pocket Z4 Instruction Manual Page 15 ADJ Products, LLC - www.adj.com - Inno Pocket Z4 Instruction Manual Page 14
PINT
- Pan Inversion
1. Press the MENU button until “ PINT ” is displayed, press
ENTER. Either “ Yes ” or “ No ” will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons
until “ Yes ” is displayed, press ENTER to confim. To deactivate
Pan inversion, select “ No ” and press Enter.
TINT
- Tilt Inversion
1. Press the MENU button until “ TINT ” is displayed, press
ENTER. Either “ Yes ” or “ No ” will be displayed.
2. To activate the tilt inversion press the UP or DOWN buttons
until “ Yes ” is displayed, press ENTER to confim. To deactivate
tilt inversion, select “ No ” and press Enter.
LED -
With this function you can have the display back-
light turn off after 10 seconds.
1. Press the MENU button until “ LED ” is displayed, press
ENTER.
2. The display will show either “
ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to keep the LED display on at
all times, or “ OFF ” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm. To make you LED display reappear
again press any button.
DISP -
This function will reverse the display 180º.
1. Press the MENU button until “ DISP ” is displayed, press
ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it
Inno Pocket Z4 System Menu
again. Press ENTER when you have made your desired setup.
TEST
- This function will run a self test program.
1. Press the MENU button until “ TEST ” is displayed, press
ENTER.
2. The fixture will now run a self test.
MANU
- In this submenu you are able to test the different
functions; pan, tilt, LEDs, zoom, dimmer, and strobe.
1. Press the MENU button until “ MANU ” is displayed, press
ENTER.
2. Use the UP and DOWN buttons to scroll through the various
functions able for testing. Once you have found your desired
function you would like to test press ENTER.
3. After you have pressed ENTER, use the UP and DOWN but-
tons to adjust the values and test the function. To exit press the
MENU button.
TEMP
- With this function you can check the temperature
of the fixture.
1. Press the MENU button until “ TEMP ” is displayed, press
ENTER.
2. The fixture temperature will now be displayed. Press MENU
to exit.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until “ FHRS ” is displayed, press
ENTER.
Inno Pocket Z4 System Menu