ADJ H2O IR User Manual Download Page 4

4

Unpacking: Thank you for purchasing the H2O IR by ADJ Products, LLC. Every unit has been thor-

oughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton 

for damage that may have occurred during shipping. If the carton appears to be damaged, carefully 

inspect your fixture for any damage and be sure all accessories necessary to operate the unit have 

arrived intact. In the event that damage has been found or parts are missing, please contact our toll 

free customer support number for further instructions. Do not return this unit to your dealer without first 

contacting customer support.

Introduction: The ADJ H2O IR is a multi-colored simulated water flowing effect light. To optimize the 

performance of this product, please read these operating instructions carefully to familiarize yourself 

with the basic operations of this unit. These instructions contain important safety information regarding 

the use and maintenance of this unit. Please keep this manual with the unit for future reference.

 

Customer Support: Contact ADJ Service for any product related service and support needs. Also visit 

forums.adj.com

 with questions, comments or suggestions.

Parts: To purchase parts online visit: 

http://parts.adj.com  

(US)

http://www.adjparts.eu  

(EU)

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

Voice: 800-322-6337 | Fax: 323-582-2941 | [email protected]
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET 

Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | [email protected]

ADJ PRODUCTS LLC USA 

6122 S. Eastern Ave. Los Angeles, CA. 90040

323-582-2650 | Fax 323-532-2941 | 

www.adj.com

 | 

[email protected]

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands

+31 (0)45 546 85 00 | Fax +31 45 546 85 99 

www.americandj.eu

 | 

[email protected]

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070

CAUTION! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, 

as doing so will void your manufacturer’s warranty. In the unlikely event your unit may require service, 

please contact ADJ Products, LLC.
Do not discard the shipping cartoon in the trash. Please recycle when ever possible.

INTRODUCTION

Summary of Contents for H2O IR















Reviews: