ADJ Products, LLC - www.adj.com - Galaxian 3D MKII Instruction Manual Page 15
ADJ Products, LLC - www.adj.com - Galaxian 3D MKII Instruction Manual Page 16
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit find your desired show and set that show by
pressing the ENTER button.
3. On the slave units
tap the MENU button until “SLND” is dis-
played, and Press ENTER. Choose either
“SL 1” or “SL 2” and
press ENTER. Please see page 12 for more info.
4. The slave units will now follow the Master unit.
Galaxian 3D MKII
Operation
Galaxian 3D MKII UC3 Control
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
Operating Modes: The Galaxian 3D MKII has two different op-
erating modes.
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Galaxian 3D MKII is a five DMX channel DMX fixture. See
page 17 for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 8-10 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 12 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Tap the MENU button until
“SOUN” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttons so that “ON” is displayed, and
press ENTER
and then hold MENU for at least 2-3 seconds.
3. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Master-Slave Operation
This function will allow you to link up to 16
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
Galaxian 3D MKII
Operation
Stand By Blackout the fixture
Function 1. Strobe Red
2. Strobe Green
3. Strobe in Green/Red
Chase Speed
1-3
Mode
Sound (LED OFF)
Speed(LED ON)
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 14 fixtures maximum. After 14 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
Galaxian 3D MKII
Power Cord Daisy Chain
