比例
1.000
Safety Cable
Safety Cable
C-clamp
Fog Fury Jett
Truss Mounting
The Fog Fury Jett fog machine carries a one year (365 days) limited
warranty. The LED system carries a two year (730 days) limited war-
ranty. Please fill out the enclosed warranty card to validate your pur-
chase. All returned service items whether under warranty or not, must
be freight pre-paid and accompany a return authorization (R.A.) num-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Fog Fury Jett
Warranty Registration
If you experience low fog output, pump noise, or no fog output at all,
disconnect and discontinue use immediately. Do not attempt to con-
tinue pushing the remote control’s activation button as this may dam-
age the fog machine. Check the fluid level, the external fuse, remote
connection, and be sure the wall outlet is sending power. If all of the
above appears to be okay, and the unit fails to operate correctly, the
unit will require service. Please contact ADJ Products, LLC.
Fog Fury Jett
Trouble Shooting
When storing your fog machine be sure to store it in a cool area.
Cover the machine so that dust does not build up on the unit. When
storing the machine for long periods of time, it is highly advised to at
least run the machine every 3-4 months. Long periods of inactivity
can severly shorten the life of your machine. Only run water based
fog juice through your machine. Never run plain water, vinegar, or any
other liquid solution through your machine. Running anything other
then water based fog juice will severly damage your machine.
Fog Fury Jett
Proper Storage and Maintenance
ADJ Products, LLC - www.adj.com - Fog Fury Jett Instruction Manual Page 16
ADJ Products, LLC - www.adj.com - Fog Fury Jett Instruction Manual Page 17
Fuse Replacement: Locate and remove the unit’s power cord. Once
the cord has been removed located the fuse holder located inside the
power socket. Insert a flat-head screw driver into the power socket and
gently pry out the fuse holder. Remove the bad fuse and replace with a
new one. The fuse holder has a built-in socket for a spare fuse be sure
not to confuse the spare fuse with active fuse.
Fog Fury Jett
Fuse Replacement
Screw one clamp via a M12 screw to the bottom of the unit.
The clamp holes are located on each side of the unit. Attach the
eyehole screw to the side of the base and pull the safety-cable
through the screw and over the trussing system or a safe fixa-
tion spot. Insert the end in the carabine and tighten the safety
screw. Use another safety cable and place the cable through
the safety cable hole located rear bottom of the unit. Insert the
end in the carabine and tighten the safety screw. Please see the
diagram above.