9
G O B O S & G O B O R E P L A C E M E N T
The gobos featured in this unit are interchangeable. Please take care when removing/replacing them,
as the metal ones are thin and easy to bend, and the glass gobos are delicate and prone to breakage.
Caution! Never open the unit when in use. Always disconnect the main power before attempting to
change the gobos.
Place the fixture on a firm flat surface. Locate the screws on the side of the moving head and remove
them. With the panel set aside, locate the Pattern Bracket Assembly and remove the (4x) screws that
secure it to the internal housing frame.
On the Gobo Holders, remove the retaining spring and carefully separate the GOBO from the GOBO
Holder. Lastly, remove the flat washer attached to the removed GOBO and attach it to the desired
replacement GOBO. Install the replacemet Rotating GOBO.
CAUTION: TAKE CARE NOT TO SCRATCH GOBO OR GOBO HOLDER
Locate the specific Rotating Gobo to replace. Carefully grip the Gobo using your thumb and index finger,
gently lift it slightly, and then pull it out and away until it fully clears the Gobo Wheel.
Summary of Contents for FOCUS SPOT 7Z
Page 1: ...FOCUS SPOT 7Z User Guide ...
Page 40: ......
