ADJ FLAT PAR QWH12XS User Instructions Download Page 11

  Flat Par QWH12XS                                            Installation

The Flat Par QWH12XS is fully operational in three different mount-

ing positions, hanging upside-down from a ceiling, hanging sideways 

on trussing, or set on a flat level surface. The unit should be mounted 

using a mounting clamp (not provided), affixing it to the mounting 

bracket that is provided with the unit. Always ensure that the unit is 

firmly fixed to avoid vibration and slipping while operating. Always 

ensure that the structure to which you are attaching the unit is secure 

and is able to support a weight of 10 times the unit’s weight. Also, 

always use a safety cable that can hold 12 times the weight of the 

unit when installing the fixture.

The equipment must be installed by a professional, and it must be 

installed in a place where it is out of the reach of people’s grasp.

When Channel 7 is between the values of 0-51, Channels 1-4 are 

used, and Channel 6 will control strobing.
When Channel 7 is between the values of 52-102, Channel 8 is in 

Color Macros Mode, and Channel 6 will control strobing.
When Channel 7 is between the values of 103-153, Channel 8 is in 

Color Change Mode, and Channel 6 will control the color change 

speed.
When Channel 7 is between the values of 154-204, Channel 8 is 

in Color Fade Mode, and Channel 6 will control the color fade 

speed.
When Channel 7 is between the values of 205-255, Channel 8 is in 

Sound Active Mode, and Channel 6 will control the sound sensi-

tivity.

  Channel   Value  

                   Function

       

8                                    SOUND ACTIVE MODE CONT.

                      32 - 47                SOUND ACTIVE MODE 3

                      48 - 63                SOUND ACTIVE MODE 4

                      64 - 79                SOUND ACTIVE MODE 5

                      80 - 95                SOUND ACTIVE MODE 6

                      96 - 111              SOUND ACTIVE MODE 7

                    112 - 127              SOUND ACTIVE MODE 8

                    128 - 143              SOUND ACTIVE MODE 9

                    144 - 159             SOUND ACTIVE MODE 10

                    160 - 175             SOUND ACTIVE MODE 11

                    176 - 191             SOUND ACTIVE MODE 12

                    192 - 207             SOUND ACTIVE MODE 13

                    208 - 223             SOUND ACTIVE MODE 14

                    224 - 239             SOUND ACTIVE MODE 15

                    240 - 255             SOUND ACTIVE MODE 16               

  Flat Par QWH12XS                                     8 Channel Mode

ADJ Products, LLC  -  www.adj.com  - Flat Par QWH12XS User Manual Page 20

ADJ Products, LLC  -  www.adj.com  - Flat Par QWH12XS User Manual Page 21

  Flat Par QWH12XS                                 Photometric Chart

Summary of Contents for FLAT PAR QWH12XS















Reviews: