Flat Par QA5XS Installation
The Flat Par QA5XS is fully operational in three different mounting
positions, hanging upside-down from a ceiling, hanging sideways on
trussing, or set on a flat level surface. The unit should be mounted
using a mounting clamp (not provided), affixing it to the mounting
bracket that is provided with the unit. Always ensure that the unit is
firmly fixed to avoid vibration and slipping while operating. Always
ensure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times the unit’s weight. Also,
always use a safety cable that can hold 12 times the weight of the
unit when installing the fixture.
The equipment must be installed by a professional, and it must be
installed in a place where it is out of the reach of people’s grasp.
When Channel 7 is between the values of 0-51, Channels 1-4 are
used, and Channel 6 will control strobing.
When Channel 7 is between the values of 52-102, Channel 8 is in
Color Macros Mode, and Channel 6 will control strobing.
When Channel 7 is between the values of 103-153, Channel 8 is in
Color Change Mode, and Channel 6 will control the color change
speed.
When Channel 7 is between the values of 154-204, Channel 8 is
in Color Fade Mode, and Channel 6 will control the color fade
speed.
When Channel 7 is between the values of 205-255, Channel 8 is in
Sound Active Mode, and Channel 6 will control the sound sensi-
tivity.
Channel Value
Function
8 SOUND ACTIVE MODE CONT.
32 - 47 SOUND ACTIVE MODE 3
48 - 63 SOUND ACTIVE MODE 4
64 - 79 SOUND ACTIVE MODE 5
80 - 95 SOUND ACTIVE MODE 6
96 - 111 SOUND ACTIVE MODE 7
112 - 127 SOUND ACTIVE MODE 8
128 - 143 SOUND ACTIVE MODE 9
144 - 159 SOUND ACTIVE MODE 10
160 - 175 SOUND ACTIVE MODE 11
176 - 191 SOUND ACTIVE MODE 12
192 - 207 SOUND ACTIVE MODE 13
208 - 223 SOUND ACTIVE MODE 14
224 - 239 SOUND ACTIVE MODE 15
240 - 255 SOUND ACTIVE MODE 16
Flat Par QA5XS 8 Channel Mode
Flat Par QA5XS Photometric Chart
ADJ Products, LLC - www.adj.com - Flat Par QA5XS User Manual Page 20
ADJ Products, LLC - www.adj.com - Flat Par QA5XS User Manual Page 21
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 18 fixtures maximum. After 18 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
Flat Par QA5XS Power Cord Daisy Chain
