ADJ Products, LLC - www.adj.com - Encore Profile 1000 WW User Manual Page 16
ADJ Products, LLC - www.adj.com - Encore Profile 1000 WW User Manual Page 17
Encore Profile 1000 WW Trouble Shooting
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is “hot”; on some other DMX devices
pin 2 may be ‘hot’). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Encore Profile 1000 WW Cleaning
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Disconnect the unit from its power source. Remove the power cord
from the unit. Once the cord has been removed, the fuse holder is
located above the powerCON connection. Use a phillips head screw-
driver to remove the fuse holder. Remove the fuse located inside the
fuse holder and replace with the new fuse. Install the fuse holder and
new fuse and secure it.
Encore Profile 1000 WW Fuse Replacement
With this feature you can connect the fixtures to one another
using the PowerCON input and output sockets. The quantity that
can be connected is 5 fixtures maximum. After 5 fixtures you will
need to use a new power outlet. They must be the same fixtures.
DO NOT mix fixtures.
Encore Profile 1000 WW Power Cord Daisy Chain
Encore Profile 1000 WW Dimmer Curve Chart
(Fade Time)
(Fade Time)
Ramp Effect
Standard
Stage
TV
Architectural
Theatre
Encore Profile 1000 WW Photometric Chart