ADJ ENC820, User Manual

Page: 14 / 37

14
Proxied Device Count Device Power Cycles
Sensor Definition Pan Invert
Sensor Value Tilt Invert
Device Model Description Pan Tilt Swap
Manufacturer Label Display Invert
Device Lavel Display Level
DMX Personality Realtime Clock
DMX Personality Description Power State
Device Hours
Preset Playback
Comms Status Default Slot Value
Status ID Description Language
Clear Status ID Language Capabilities
Lamp Hours Boot Software Version Label
Lamp Strikes Boot Software Version ID
Lamp State Product Detail ID List
Lamp Mode Status Messages
R E M O T E D E V I C E M A N A G E M E N T ( R D M )
NOTE: In order for RDM to work properly, RDM enabled equipment must be used throughout
the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard
for lighting, allowing the DMX systems of the fixtures to be modified and monitored remotely. This
protocol is ideal for instances in which a unit is installed in a location that is not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled
controller to send out a signal to devices on the wire, as well as allowing the fixture to respond
(known as a GET command). The controller can then use its SET command to modify settings that
would typically have to be changed or viewed directly via the unit’s display screen, including the DMX
Address, DMX Channel Mode, and Temperature Sensors.
Please be aware that not all RDM devices support all RDM features, and therefore it is important
to check beforehand to ensure that the equipment that you are considering includes all of the features
that you require.
The following parameters are accessible in RDM on this device: