ADJ Color Stand LED, User Manual

Page: 17 / 21

17
R E M O T E C O N T R O L
PAIRING: The original remote that comes in the box is already paired to the unit. In the event that the
remote is not paired with the unit, or if pairing to an additional unit, follow the steps below:
1)
Unplug the power to the main unit and reconnect the power after ten seconds.
2) Press the “SPEED –“ and “SPEED +” keys together within 5 seconds of reconnecting the power.
CHANGE OUTPUT COLOR SEQUENCE: The default output color sequence is: Green, Red, and Blue. If
for any reason, the unit is displaying a different sequence, or the Direct Color Select keys do not match,
the unit can be reconfigured by following the steps below:
1)
Unplug the power to the main unit and reconnect the power after ten seconds.
2) Press the “RED” and “Blue” keys together within 5 seco nds of powering the unit on.
a. The unit will toggle between 6 color combinations and the sequence will be memorized.
POWER
Turns the unit ON and restores the unit to previous status. If the unit is on, the unit will enter standby mode.
DEMO
Play 17 dynamic modes in a loop. Each mode repeats 3 times.
MODE +/-
This button lets you cycle through color fade mode, color change
mode, and auto run modes. Each press of the button will change to
the next mode. There are 22 different programs. You can use the
“+”
and “ - ” buttons to cycle through the 22 programs.
SPEED +/-
There are 10 speeds to choose from. Select the speed using the
“ SPEED + ” or “ SPEED –“ button.
COLOR +\-
There are 20 colors to choose from. Select the color using the
“ COLOR +” or “COLOR –“ button.
\-
There are 5 brightness levels to choose from. Adjust the brightness
using th
e “ BRIGHT +” or “BRIGHT –“ button.
DIRECT COLOR SELECT BUTTONS
There are 7 shortcut keys. Each key represents a static color. These
colors are also included in COLOR +/- selections.