ADJ BOO663 User Manual Download Page 16 | Manualshive

Page: 16 / 28

ADJ BOO663 User Manual Download Page 16

Boom Box FX2

Offset Menu

To enter the home position adjustment menu, press the ENTER button for at least 5 seconds. In this

submenu you are able to adjust the original position of the beam and gobo motors and laser motors.

oPA1 - Adjustment of the beam motor.

1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that

“oPA1” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.

Press the MENU button for one second to exit.

oPA2 - Adjustment of the gobo motor.

1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that

“oPA2” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.

Press the MENU button for one second to exit.

oLAh - Adjustment of laser motor 1.

1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that

“oLAh” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.

Press the MENU button for one second to exit.

oLAY - Adjustment of laser motor 2.

1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that

“oLAY” is displayed, press ENTER.

2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.

Press the MENU button for one second to exit.

ADJ Products, LLC - www.adj.com - Boom Box FX2 User Manual Page 16

«
...
14
15
16
17
18
...
»

Summary of Contents for BOO663





























Reviews:

No comments