11
I N S TA L L AT I O N
OMEGA BRACKET INSTALLATION
Insert the Omega Bracket into the matching holes on the top of the device. Secure the Omega
Bracket to the device by turning each quick-lock fastener ¼ turn clockwise. Always check to make
sure that each fastener is completely locked.
CLAMP INSTALLATION
When mounting the device to a truss, be sure to secure an appropriately rated professional grade
rigging clamp to the included Omega Brackets using an M10 screw fitted through the center hole of
the Omega Brackets.
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating working load
limits, understanding the installation material being used, and periodic safety inspection of all installa-
tion material and the fixture itself. If you lack these qualifications, do not attempt to perform the instal-
lation yourself. Improper installation can result in bodily injury.
MOUNTING
CLAMP
OMEGA
BRACKET
OMEGA
BRACKET
ATTACHMENT
POINT
OMEGA
BRACKET
ATTACHMENT
POINT
Summary of Contents for ACCU-CABLE POWER BONE T1ED
Page 1: ...User Manual POWER BONE T1ED EXTEND YOUR WORLD TM ...
Page 16: ......
