ADJ 760-00014, User Manual

Page: 8 / 8

Warranty
This product is guaranteed against any manufacturing defect, as defined on the D.Lgs.
February 2, 2002, No 24. In case of failure, please contact the retailer where you purchased it.
You can be found at
www.adj.it for standards guarantee.
Please use the product only for the purpose for which it was designed. It is forbidden any other
use or modification.
Additional compliance information:
To obtain additional information about the compliance, go to ADJ website:
www.adj.it/certification or contact the ADJ Customer Support to the following e-mail address:
supporto@adj.it
Made in China - Imported and distributed by IoT Tecnologie s.r.l.
Via della Faeta, 1 - 00030 San Cesareo (RM)
– ITALY
This product complies with the following directives:
• DIRECTIVE 2014/30/EU on the harmonisation of the laws of the Member
States relating to electromagnetic compatibility;
• DIRECTIVE 2011/65/EU on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
The declaration of conformity for this product is visible on
www.adj.it site,
on the product page.
The symbol of the crossed out trash indicates that the product, at the end
of its useful life, must be treated separately from domestic waste and must
be taken to a recycling center for electrical and electronic equipment or
delivered to the seller when buying a replacement. The separate waste
collection contributes in preventing possible adverse effects on the
environment and health and promote the recovery of materials it is made.
You are responsible for assigning the equipment in question at the
appropriate waste disposal center. For more detailed information contact
your local waste disposal service or the shop where it was purchased.
Anyone who does not carry the product in a recycling center for electrical
and electronic waste shall be punished with administrative penalty provided
by law on the illegal disposal of waste.