ADJ Products, LLC - www.adj.com - 3D Vision Encoder Instruction Manual Page 4
ADJ Products, LLC - www.adj.com - 3D Vision Encoder Instruction Manual Page 5
3D Vision Encoder Indicators, Connections, & Functions
1. Display
2. Set Button – This button is used to confirm setting.
3. Mode Button - This button is used to switch between the dif-
ferent menus.
4 & 5. Up and Down Buttons - Use these buttons to adjust the
DMX address and adjust the DMX channels. (Note: DMX chan-
nel mode should already be set out of the box. The 3D Vision
is a 9 channel unit.)
6. Power Switch – Power the Encoder on/off using either bat-
tery power or connected power adapter.
7. DC12V Input – DC Power socket for included power adapter.
8. Power LED – This LED will glow when the power is switched
“On”.
9. Output - This output connects to the 3D Vision using a CAT 5
Straight Network cable.
3D Vision Encoder
Warranty Registration
The 3D Vision Encoder carries a
1 year (365 day) limited warranty
.
We recommend you fill out the enclosed warranty card to vali-
date your purchase. All returned service items whether under
warranty or not, must be freight pre-paid and accompany a
return authorization (R.A.) number. If the unit is under warranty,
you must provide a copy of your proof of purchase invoice.
Please contact ADJ Products, LLC customer support for a R.A.
number.
R
SET MODE
1
3
3
4
5
DC9-12V
OUTPUT
Battery
Adapter
LED
6
7
8
9
3D Vision Encoder
Setting a DMX Address
Setting the DMX address for the 3D Vision is very easy. Follow
these simple instructions to set your desired DMX address.
1. Either connect the supplied power adapter to 3D Vison Encoder
or insert a 9V battery into the battery compartment located at the
front of the unit.
2. Next connect the Encoder to your 3D Vision via CAT 5 straigh
network cable.
3. Connect the 3D Vision to a power source and switch “On” the
power to the Encoder.
4. The Encoder display will show:
Start CH: 0001
CH mode: 0009
5. Use the UP or DOWN buttons to find your desired DMX
address.
6. Once you have found your desired DMX address press the
SET button to set the DMX address. When you press the SET
button the display will show “Writing Addr...”. Once the address
is set and if it is set correctly the display will read “Writing OK”.
7. The DMX channel mode should be set already for you. The 3D
Vision is a 9 channel unit. Press the MODE button to scroll to the
CH mode setting. Use the UP or DOWN buttons to change the
setting. Press the SET button when finished.