User Manual MIC 980
Issue 21.01.2019_01
32
12.2 Enabling and disabling a signal
This function allows you to switch off the „Signal“ aggregate at specific times during the day or night.
S
elect „Enabling signal” from the „Profiles“ list “ and a button „ON“ or „OFF“ will appear.
„OFF“
= Signal is completely disabled.
„ON“
= Signal function is enabled. This means that if the corresponding event happens, the relay
„Signal“ will switch. You can enter two additional times (from – to), putting a time limit on the
signal function.
Please note
With setting „00.00“ to „00.00“ the signal will be active all day.
Be aware
If a signal event transgresses a pre-programmed time lock interval, its state remains
unchanged.
For example: the alarm signal in enabled from 7 a.m. to 5 p.m
. Let’s assume the signal
comes on at 4.50 p.m., then it will remain on even beyond the time lock set for 5 p.m. The
same is true vice versa. If an alarm happens before 7 a.m. the signal will not come on and
will remain off even after 7a.m.
12.1 Programming of start times
Here you can program start times referring to day of the week.
The programmed start times are displayed in standby mod and serve for the simply enter the night
time preheating.
Standby
Menu
Profiles
enable signal
Menü
Profile
Enter
Programmierung der Startzeiten
Enter
