26
Preparation
Preparation
Installing the Serial Converter Driver Software
1.
Turn on the PC is installed the Scope application.
End the Scope application once while the Scope application is operating.
2.
Set the CD-ROM of the driver software attached to the electronic stimulator
to the CD drive of the PC.
3.
Turn on the electronic stimulator.
4.
Connect the electronic stimulator to the PC with the USB cable attached to
the electronic stimulator.
The New hardware detection wizard is opened.
5.
Click
“
Install from a list or specific location (Advanced)”, and then click
the Next > button.
6.
Click
“
Search for the best driver in these locations.”.
Specify the CD-ROM drive, and then click the Next > button.
Summary of Contents for MA3300
Page 1: ...making science easier ADINSTRUMENTS MA3300 Audio Monitor Owner s Guide ...
Page 9: ......
Page 57: ......
