6
LAP COuNTING
1. Press D while the chronograph is running for lap counting (up to 10 laps).
NOTE: After 8 seconds, display will show total chronograph time in the lower portion
of the display; next lap running time will show in upper portion of the display.
2. Press C to stop chronograph.
3. Press B when the chronograph is stopped to recall chronograph lap data.
4. Press C or D to exit recall mode and return to chronograph.
TIMER MODE
1. Press A to change to timer mode.
2. Press C to start/stop timer.
3. Press D to reset the timer.
NOTE: Alarm will sound for 30 seconds when countdown reaches zero. Press any
pusher to silence alarm.
TIMER SETTING
1. In timer mode, press and hold B 2 seconds to enter setting mode; timer type will
begin flashing.
2. Press C to select countdown-stop (“CD-STP”), countdown-repeat (“CD-REP”), or
countdown-then up timer (“CD-UP”).
3. Press A to set and advance to next setting value.
4. Press C to increase digit; press D to decrease digit. Press and hold C or D for fast
increment/decrement.
5. Repeat steps 3 and 4 through setting sequence. Setting sequence is: timer type,
hour, minute, seconds.
6. Press B to exit setting mode.
ALARM MODE
1. Press A to change to alarm mode.
2. Press C to select alarm 1-4.
3. Press D to toggle alarm on/off.
ALARM SETTING
1. In alarm mode, press and hold B 2 seconds; hour will begin flashing.
2. Press C to increase digit; press D to decrease digit. Press and hold C or D for fast
increment/decrement.
3. Press A to set and advance minute.
4. Repeat step 2.
5. Press B to exit setting mode.
NOTE: Alarm will sound for 30 seconds. Press any pusher to silence alarm.
